Stěžeň Point-7 Black Core - 80% SDM

Kód: 5772/400 5772/430 5772/460 5772/490 Zvolte variantu
Neohodnoceno
Značka: Point-7
10 100 Kč 10 600 Kč 11 000 Kč 11 500 Kč od 10 100 Kč
NA OBJEDNÁVKU NA OBJEDNÁVKU NA OBJEDNÁVKU NA OBJEDNÁVKU Zvolte variantu
Délka stěžně
Zvolená varianta není k dispozici. Reset vybraných parametrů.
Můžeme doručit do:
2.10.2020 2.10.2020 2.10.2020 2.10.2020 Zvolte variantu

The BlackCore mast range comprises an 80% carbon content and is produced to the exact specifications of the Point-7 standards for bend-curve and hardness. The performance against the BlackPrime is very minimal and can only be measured with a clock, it will not be felt. Using the same high-performance construction ensures this mast superior performance in comparison with others in its class.

Detailní informace

Detailní popis produktu

WHY THIS MAST

The high carbon content and quality of this mast will ensure durability and a good reflex that will lighten the feeling of any rig. Advantages gained from a higher glass content and lower carbon percentage, is that the masts are better protected against breakage but thereby also a little slower in its response than a pure carbon mast.

THE BLACKPRIME MAST IN SHORT

  • An extra catapult, an extra crash, long time rigged, this mast will not suffer
  • Best compromise between price, performance and durability
  • Racing without any type of stress or worries
  • Consists of 3 carbon layers and 1 layer of glass

13_09_2018_p7_mast_zero19_black_core_3

Point-7 masts are manufactured using the Prepreg-Autoclave process which creates an extremely homogenous carbon/resin mix under high pressure. Using a newly patented procedure which allows the resin to be distributed in equal quantities around the mast walls, the masts are guaranteed to have an equal curve around all its diameter, and thus more uniform in comparison to former production procedures. The resin is reduced to an absolute minimum for unprecedented durability. The resin used is top quality as well and will give support to the carbon even on very hot temperatures and on water crashes.

Délka Průměr Carbon % Tvrdost IMCS Zakřivení Váha (Kg) +-5
400 SDM 80 20.5 Constant Curve / Soft Bottom / Hard Top 1.52
430 SDM 80 21 Constant Curve / Soft Bottom 1.71
460 SDM 80 24.5 Constant Curve 1.90
490 SDM 80 28 Flex Top 2.19

Doplňkové parametry

Kategorie: SDM - Standardní průměr, 400 cm
Materiál: 80% Carbon
? Typ: Constant Curve / Flex Top / Hard Top
? Průměr: SDM

Buďte první, kdo napíše příspěvek k této položce.

Přidat komentář
Nevyplňujte toto pole: