Hydrofoil Neilpryde Glide Wind / Tuttle box
Kód: BXFO10GWDProdukt s "možností otestovat" lze půjčit u nás dle domluvy.
Detailní popis produktu
If you are new to foiling this could be your go-to foil.
It is designed with round edges on the wings for safety and engineered for low-speed take off. We recommend using small sail sizes and any bigger freemove, wave or freestyle board as well as medium sized freeride and freerace boards, check out our sister brand JP for the right board.
The foil’s front wing shape prevents accidents on the waters and softens landings. It is ideal for early foil stages from schools to clubs.
Our innovative Powerbox system, the Aluminum mast and perfectly blended fuselage offer the best connection to most windsurf boards. It is specifically designed to work on narrow boards (from freestyle-wave 100L to large freeride boards), which we also used for the product testing phase.
This foil will ensure that you will love foiling, as you glide over the water.
RIDERS FEEDBACK
I tried this foil with a free ride board and a small wave sail. It was super easy to fly and very stable in the air. It felt very comfortable, the foil lifts very quickly even in lighter wind, it doesn’t need a lot of speed to take off, which is very reassuring.
I also had a good freestyle session with it, the foils allows you to have good turns on waves or swell, which is so much fun!
What I really like is, that it’s so easy to assemble with its one screw base system.
To get most out of this foil, I would recommend that you position your body more vertical above the deck, hence, place the foot straps at the center of the board (like on a wave board) to get more control and comfort. Lastly, I recommend no-cam sails with this foil. - Julien Bontemps, Olympic Athlete, Team Rider Windsurf
Technology
BASE SYSTEMNew CNC reinforced base construction. Two deep vertical tube connections to the mast for maximum strength, eliminating movement and offering perfect load transfer. Avoids vibration around the upper attachment area. GLIDE SURF foil comes with Top Plate base system. |
BOLTSx18 M8 titanium plated Stainless Steel bolts for maximum strength to weight ratio while preventing any corrosion problems. All using T-40 Torx drive, delivered with the product. |
TAIL WING ADJUSTMENTDelivers inverted thrust to balance the main wing and maintain easy control and stability. Foil is perfectly trimmed for average weight rider (75- 80kg) with tail in neutral position. Heavier riders, especially in light winds or during the learning process might prefer slightly more stabilizing force that a down tilted rear wing provides. Also, this down-angled position increases low-end power and lift of the foil. At the same time lighter riders, especially in strong wind conditions, may benefit from a drag and lift reduction by reducing the downwards tilt angle of the rear wing. Less down-angle will reduce the differential angle between the two wings and make the foil feel less draggy in the water, resulting in the fastest possible foiling sensation. |
MAST60 cm Aluminum mast. Optimized structure with two CNC female base system inserts ensuring maximum strength. Hollow construction to reduce weight combined with x3 vertical cross-ribs for maximum stiffness. Sanded mast trailing edge to avoid planning turbulence noise. Tempered, salt water corrosion resistant 6061-T6 aluminum. |
FUSELAGEPerfectly blended wing to CNC machined fuselage connection and integrated wind saddle providing minimum drag. Volume and weight of the aluminium used in fuselage is reduced by eliminating the forward protruding nose. |
WINGSGLIDE SURF pre-preg carbon layup with inner foam construction for maximum durability to weight ratio. Front wings span, Large: 86cm / Medium: 75cm and Small: 64cm. Tail wing span, Large: 51cm / Tail wing span, Small: 40cm. GLIDE wings setup creates a natural tendency to roll into turns maintaining a nice balance during your ride. The Front wing is designed with a pronounced rounded Angle of attack and an elliptical bend shape. While flying, this thick leading edge on the front wing naturally closes the radius of your turn, tightening it. Far back, the angled down tail wings maintain a self-stabilizing roll allowing an easy turning performance. During this momentum, the GLIDE tail wing persists always want to come back to a flat position and cancelling the turning radius. |
INTERCHANGEABLE TOP BASES:The Glide Wind comes with a top plate base system in the original packaging and can be interchanged with the following other Top Base systems: |
INTERCHANGEABLE WINGSThe glide wind foil can be interchanged with the S, M, L sized wing set. |
Mast | 70 cm |
Front wing span, Small | 64 cm |
Tail wing span, Small | 40 cm |
Base | Powerbox base system OR Deep Tuttle Box base system |
Construction | Aluminum / Pre-preg carbon layout with inner foam |
PRODUCT COMPATABILITY
Our Neilpryde foils are set to be compatible, therefore we have listed an overview to make it easy for you to understand what the foil comes with in its original packaging vs. with which parts from other foils it can be used with to extend your possibilities on the water, without buying extra foils.
USAGE AND RIDER INFO
Are you wondering which foil to buy for which conditions? We have created a chart to showcase what each foil is best suitable for as well as for whom it is best suitable.
Doplňkové parametry
Kategorie: | Hydrofoil na windsurfing |
---|---|
Rok výroby: | 2019 |
NeilPryde Glide Wind Powerbox Mounting Instructions
The 2019 GLIDE WIND - NeilPryde Windsurfing
Buďte první, kdo napíše příspěvek k této položce.
Jak ve vývoji plachet pro windsurfing, tak ve vývoji vodního oblečení a doplňků vyrobených pro Wind-Watersports, NEILPRYDE vybudoval dědictví v posledních desetiletích a pokračuje v tom. Společnost NEILPRYDE, založená na vášni pro plachtění, nezaložil nikdo menší než muž jménem Neil Pryde – vášnivý námořník, který založil svou firmu na vývoj jachtařských plachetnic. Na začátku 70. let se rozhodl změnit své podnikání a zaměřit se na výrobu plachet pro trendy a nadcházející sporty windsurfing. Zatímco zpočátku ještě vyráběl plachty pro jiné značky, brzy se rozhodl založit vlastní značku windsurfingových plachet, což znamenalo začátek NEILPRYDE Windsurfingu.