Plachta Gun Sails Stream

F.R.E.D

F.R.E.D. will help you to fi nd the optimal luff trim for your sail. The mark is found in the upper sail window and serves as an orientation point to create the perfect luff tension (loose leech).

TOP GUARD

The large reinforcement at the sail top avoids abrasion and wearing out whilst rigging.

VARIO TOP

The top opening is enlarged for an easier mast insertion. The adjustment buckle is placed behind the mast; unnecessary webbing can be stowed in the top opening.

MINI BATTNES

Lightweight mini battens take control of the leech while twisting and avoid detrimental leech fl utter. In this way, the window fabrics are spared and the longevity of the sail is predefined.

BATTEN GUARD

PVC tabs on the upper batten pockets prevent wearing out and abrasion whilst rigging.

INTERNAL TRIM BATTEN

Lightweight mini battens take control of the leech while twisting and avoid detrimental leech fl utter. In this way, the window fabrics are spared and the longevity of the sail is predefined.

POCKET GUARD

A PVC braid, sewed on the bottom batten pocket, protects your sail from abrasion while uphauling and waterstarting.

REDUCED BOOM LENGHT

The Reduced Boom Length design shortens the boom length. The handling is much easier and feels more compact. The sail control is signifi cantly improved. A shorter boom is generally stiffer and will assist in maintaining the sail stability and profile.

OFFSET CLEW

The Wave sails are equipped with 2 clew eyelets which are set asymmetrically for individual tuning:

Upper eyelet for more power
Lower eyelet for more control

TRIM SETTING

The boom length is printed beside the clew. The mast lenght is patched on the mast protector.

BOOM POSITION CONTROL

DOUBLE LOCK SEAMS

Double seams form the most stable connection between individual panels and different materials. They are used in stress zones as well as in areas of high tension and make your sail robust and durable.

FOOT GUARD

All seams in the significantly stressed foot area are protected by Dacron coverings. A PVC edging from foot to the first batten protects the leech edge against your board’s nonslip coating.

COMFORT PULLEY

The integrated triple pulley has large easy turning stainless brass rolls which greatly reduce the effort required for sail trimming. Also, if you prefer, the rolls are removable to allow the use of standard downhaul pulley hooks.

SLEEVE VOLUMER

STRAP ON

For very easy packing away and storage: Just roll the sail up and fix the elastic retainer.

MESH POCKET

On the inside of the protector you will find a closable mesh pocket which can hold e.g. your downhaul surplus.

MAST FOOT PROTCTOR

The well designed combination of different materials allows weight savings without losing stability. By varying the stretch behaviour of the individual materials, we can precisely define each sail profile under pressure and guarantee you consistent sailing characteristics over the long term.

DOUBLE LOCK SEAMS

Double Seams provide the most stable connection between panels or different materials. They find use in areas of high material tension and make your sail tough and durable.

The Smart Clew Construction is based on the tension specific and precise alignment of different materials. The result is an extremely durable clew area without additional weight. Depending the sail the layout of the materials varies in order to suit the resulting tension lines in order to distribute the force from the clew, towards the Tension Frame into the sail. That helps to create more response, better profile stability and long lasting sail characteristics.

Multidirectional X-Ply is used in high stress areas. The thread layout shows a higher density of polyester yarn, thus making the material more resistant than the regular X-Ply. The additional vertical thread direction allows the material to take more tension and force in the critical tension line.

SQUARE-PLY

The square ply is based on the same concept as X-ply material. However the threads are aligned in a 90 degree angle and the material offers a higher overall thread density. That allows us to reduce the thickness of the included monofilm to save weight, but ensure durability at the same time.