Plachta Neilpryde Rs Flight

Kód: 6522/5.4 6522/6.2 6522/7.0 6522/7.8 6522/8.8 Zvolte variantu
3 hodnocení
Značka: Neilpryde
33 600 Kč 34 100 Kč 34 900 Kč 35 400 Kč 36 200 Kč od 33 600 Kč –30 %
neilpryde plachta rsko rs flight windsurfing karlin
33 600 Kč 34 100 Kč 34 900 Kč 35 400 Kč 36 200 Kč od 33 600 Kč –30 % 23 500 Kč 23 900 Kč 24 500 Kč 24 800 Kč 25 400 Kč od 23 500 Kč
NA OBJEDNÁVKU NA OBJEDNÁVKU NA OBJEDNÁVKU NA OBJEDNÁVKU NA OBJEDNÁVKU Zvolte variantu
Velikost v m²
Zvolená varianta není k dispozici. Reset vybraných parametrů.
Můžeme doručit do:
30.9.2019 30.9.2019 30.9.2019 30.9.2019 30.9.2019 Zvolte variantu

High performance sail based on RS:RACING design and specifically developed to perform both on Wind foil and Slalom boards. The RS:FLIGHT is an evolution of the RS:RACING LT1 sail, and is designed on the concept of real world racing combined with key foiling features. Compared to a pure racing sail, the RS:FLIGHT has a higher aspect ratio, shorter boom and increased foot size to accommodate vertical rake when foiling.

Detailní informace

Detailní popis produktu

The sail delivers quick and precise response instantly allowing the rider to adjust the power by sheeting in or out to control the flying height on the foil. The RS:FLIGHT brings a combination of excellent top-end speed, enhanced bottom-end power, superior control and stability to a wide range of performance minded sailors.

TWIST SHAPING CONCEPT

The twist shaping concept incorporates powerful, forward-oriented lower body profile together with increased twist and profile reduction in the mid-body area of the sail. This concept retains power and acceleration while at the same time increases the release in the lower leech area. As a result, the new R:FLIGHT can be sailed with more rake angle, increasing lift on the fin and improving top-end acceleration and speed. At the same time head twist is controlled in order to keep consistent pressure on the mast foot and prevent the nose of the board from lifting in gusts.

highlight_00_1000x_crop_top_db8878fe-1038-4ff3-ae0c-8faf0fd675a1_large
   
highlight_01_1000x_crop_top_5787129b-599a-4f11-a5f0-abb707e401c0_large

PROGRESSIVE ASPECT RATIO

RS:FLIGHT features progressive aspect ratios across different sail sizes in order to address the specific functionality. Higher aspect ratio in larger sizes (7.8 and up) increases light wind efficiency and performance of the rig as well as improving maneuverability at the marks by reducing the boom length. Lower aspect ratio in smaller sizes (7.0 and down) helps maintain top-end control and stability by focusing the sail center of effort around the rider area where it is easier to control.

   

DUAL BOOM LENGTH DYNAMIC COMPACT CLEW

The dual boom length options, allows for the rider to adapt the sail's performance to various conditions. Outer clew position can be used when you are looking for extra power and upwind lift while the inside clew setting provides better power release and control. Those performance adjustments are made possible by the outer position supporting (locking) the lower leech twist for increased power, while the inner position allows the lower leech to twist freely making it release excessive power while locking the draft forward.

RSFlight_clew_new_large
   
highlight_03_1000x_crop_top_99c1de2e-46d7-4642-bd18-7d722ce65cf4_large

SEAMLESS LEADING EDGE

The evolution of component sleeve construction completely eliminates the front seam along the sail leading edge. This increases precision during the assembly process, reduces weight at the leading edge, creates a perfectly clean profile entry and eliminates a weak spot in construction at the exposed leading edge by removing any stitching that could come in contact with the mast.

   

COMPONENT SLEEVE CONSTRUCTION

Combining materials with specific properties in the RS:FLIGHT sleeve allowed us to achieve optimum profile entry stability and elasticity, critical for rotation and light weight. Front section (1) is made from Luff Glide woven material that has the necessary elasticity and durability to resist wear from direct mast contact. A low stretch Dyneema ArmourWeb section (2) can take high downhaul tension and is critical in stabilising the profile entry, providing smooth bridging between Ultra Cams. Tetoron is used for central-rear part of the sleeve (3) as this material combines elasticity, durability and light weight. Elasticity is critical to keep soft rotation as well as improves pumping performance in light wind.

RSFlight_diagram_2_a118367d-e23a-4151-8fc3-edc45d61d3cd_large
   
RSFlight_diagram_1_large

QUADRUPLE LUFF PANEL LAYOUT

RS:FLIGHT features four continuous luff panels that carry most of the sail body shaping. This configuration stabilises the critical section draft position while also providing lightweight yet stretch-resistant way of increasing the film thickness proportional with downhaul load distribution. Continuous panels eliminated horizontal seams crossing the highly loaded leading edge, which increases response of the sail as well as durability. Introduction of this extremely stable leading edge platform that is able to take very high downhaul loads allowed us to integrate Clear Pocket construction in the remaining sail body.

Vlastnosti

RSFlight_features_grande

rsflight_technology_03_282f4311-617a-4177-8e40-f014d994a010_large carbon_leech_mini_batten_compact rsracing_evo9_technology_09_large batcam_screw_adjuster_compact rsflight_technology_12_large_a3181bc5-4198-4d31-bdb3-b030f35faf60_large

1 MINI BATCAM

2 CARBON LEECH MINI BATTENS

3 LOOPSTERS

4 BATCAM SCREW ADJUSTER

5 MINI CARBON BATTENS

Streamline and reduce weight in critical upper leech.

Provide max support with minimum weight.

Allowing easy rigging through loop to loop system that reduces the friction and eliminates any crossing lines (crucial when using adjustable outhaul system).

For easy and precise tension application.

For a smoother leading edge in the upper area where no cams are used.

         
rsracing_evo9_technology_06_large rsracing_evo9_technology_09_large rsracing_evo9_technology_10_large rsracing_evo9_technology_11_large rsracing_evo9_technology_05_large

6 THREE-PIECE CAM BATTENS

7 KEVLAR BATTEN BRIDGES

8 AERODYNAMIC BOOM CUTOUT CLOSURE

9 BATTEN CHAFE PROTECTION

10 3X ULTRACAMS

A 3-piece batten provides the framework for the design of a smooth, lightweigh and stable sail profile.
A. Carbon/fiberglass tube: stiffest section
B. Hollow mid-section: medium stiffness
C. Precision Tapered CNC Batten: variable stiffness
To distribute the high downhaul load crossing the battens.

Prevents the apparent wind from blowing into the mast sleeve and generating drag

Abrasion resistant PU print to help protect the battens from damage caused by rigging or boom contact.

Innovative suspended camber system dramatically improves sail rotation and acceleration out of gybes.
Simultaneous tuning of battens and cambers makes the sail easy to tune.
         
    rsracing_evo9_technology_08_large    
   

11 CLEAR POCKET BATTEN SLEEVE

   
    Overlapping body panels create a sleeve for battens, eliminating the need for traditional, separate batten pockets. This saves on unnecessary weight, simplifies construction and creates a fully symmetrical batten cavity, eliminating the tendency of traditional batten pockets to load differently from one tack to another.    

Velikost

Luff

Ráhno

Base

Váha Kg

Spiry

Kembry

Doporučeny stěžeň

Top finishing

5.4 416 163-169 16
5.95kg
8 3 400RDM Fixed Head
6.2 441 176-182 12
6.35kg
8 3 430 Fixed Head
7.0 466 190-196 6
5.80kg
8 3 460 Fixed Head
7.8 490 203-209 30
6.15kg
8 3 460 Fixed Head
8.8 515 215-221 26
6.50kg
8 3 490 Fixed Head

*Pokud jsou u stěžně uvedeny dvě možnosti, první volbou je velikost, kterou doporučujeme pro většinou windsurfařu.

Technologie plachet Neilpryde

Doplňkové parametry

Kategorie: Plachty, 5.4m²
Rok výroby: 2019
? Počet Cambru: 3 cams
? Počet Spir: 8
? Doporučeny stěžeň : RDM / SDM

Buďte první, kdo napíše příspěvek k této položce.

Přidat komentář
Nevyplňujte toto pole: