Plachta Neilpryde V8
Kód: 6471/8.7Produkt s "možností otestovat" lze půjčit u nás dle domluvy.
Detailní popis produktu
- Custom laminated clew for optimized strength and load distribution. It features internally laminated Kevlar stripes that distribute the loads in the Clew area.
- Deep profile in lower body section for controllable power combined with very smooth leech release and open head twist for acceleration and control in the gusts.
- Moderate sleeve width combining stability and aerodynamic benefits of wide sleeve racing sails with improved handling and reduced weight.
- Twin Cam design uses cams in a critical place to support the deepest profile in the boom area without sacrificing rotation.
- Fully tubular middle and upper sail section reduces the weight and provides optimum profile stability; only foot batten does not use tube in order not to compromise durability in this vulnerable area.
- Integrated Batten Pocket construction for a fully symmetrical batten cavity
DESIGNER'S COMMENT
On the new V8, I merged the advantages of wide, race inspired luff sleeve design and a deep powerful profile with soft rotation, easy rigging and light weight made possible by the Integra-Cam. The result is an incredible acceleration from get-go, excellent middle wind range top speed and upper-end camber-supported profile stability.
CONSTRUCTION TECHNOLOGY
NeilPryde sails are built tough, designed to withstand the most extreme riding conditions and the test of time. Extra muscle and twice the endurance are achieved with twin seams and ArmourWeb reinforced construction. This, together with our Forceline technology, provides the backbone of NeilPryde sail strength and unmatched durability.
So go as hard as you like and then some.
ARMOR WEB
ArmourWeb is constructed from full polyester lines at +/-40 degrees, creating an interlaced, woven web for high tear resistance. Available on Fusion / Ryde / Speedster / V8 / DragonflyAvailable on all sails except EVO8, LT1, RS:X, RS:One.
ARMOR ULTRA
High-strength rip-stop grid made of high-tenacity ULTRA yarns at +/-40 degrees. This yarn has a similar breaking strength to KevlarTM, but much better UV resistance. Available on Fly / Combat / Atlas / Wizard.
CUSTOM PRINTING
Our custom printing technology allows us to print the films prior to lamination giving us the flexibility to use multi-coloured, custom graphics. The print is of minimal thickness, reducing weight and producing a higher definition of colour. During lamination the printed side is placed on the inside of the film so there is no need to worry about wear. Your sails will forever remain looking bright and fresh.
FUSE POCKETS
Overlapping body panels create a sleeve for battens, eliminating the need for traditional, separate batten pockets. This saves on unnecessary weight, simplifies construction and creates a fully symmetrical batten cavity, eliminating the tendency of traditional batten pockets to load differently from one tack to another.
POWERFUSE
Powerfuse is a whole new way to reinforce and lighten the sail body by using an innovative material fusion method. Doing away with unnecessary patch reinforcements, seams and stitches, we created fully integrated, laminated panels of variable thickness that support localised loads and strengthen the sail where it needs it most.
TWIN SEAMS
Double stitching is used on all critical seams on all sails allowing them to endure prolonged exposure to high loads and impacts.
Sail Shaping
Sail shaping balances the speed and power of a sail with control and handling. Shaping lower down in the sail will produce a little less power but increases manoeuverability. Shaping higher up in the sail creates more drive and low-end power.In the performance oriented sails this extra power is easy to control due to the profile stability supported by cams and tube-battens. In the manoeuvre and wave oriented sails, low shaping distribution provides uncompromised manoeuverability.
Velikost | Luff | Ráhno | Base | Spiry | Kembry | Doporučeny stěžeň | Top Finishing |
6.2 | 434 | 187/192 | 4 | 7 | 2 | 430 | Fixed Head |
6.7 | 454 | 193/198 | 24 | 7 | 2 | 430 | Fixed Head |
7.2 | 472 | 199/204 | 12 | 7 | 2 | 460 | Fixed Head |
7.7 | 490 | 199/204 | 30/0 | 7 | 2 | 460/490 | Fixed Head |
8.2 | 507 | 210/215 | 18 | 7 | 2 | 490 | Fixed Head |
8.7 | 524 | 215/220 | 34/4 | 7 | 2 | 490/520 | Fixed Head |
9.4 | 542 | 221/226 | 22/52 | 7 | 2 | 520/490 | Fixed Head |
NeilPryde 2018 Collection
The 2018 V8 - Neilpryde Windsurfing
Buďte první, kdo napíše příspěvek k této položce.
Jak ve vývoji plachet pro windsurfing, tak ve vývoji vodního oblečení a doplňků vyrobených pro Wind-Watersports, NEILPRYDE vybudoval dědictví v posledních desetiletích a pokračuje v tom. Společnost NEILPRYDE, založená na vášni pro plachtění, nezaložil nikdo menší než muž jménem Neil Pryde – vášnivý námořník, který založil svou firmu na vývoj jachtařských plachetnic. Na začátku 70. let se rozhodl změnit své podnikání a zaměřit se na výrobu plachet pro trendy a nadcházející sporty windsurfing. Zatímco zpočátku ještě vyráběl plachty pro jiné značky, brzy se rozhodl založit vlastní značku windsurfingových plachet, což znamenalo začátek NEILPRYDE Windsurfingu.