Plachta Gun Sails Torro FR

Kód: 6414/11 6414/12 Zvolte variantu
Akce
Značka: Gun Sails
12 700 Kč 12 900 Kč od 12 700 Kč –11 % –10 % až –11 %
torro prosity monofilm rf windsrufing karlin board shop
12 700 Kč 12 900 Kč od 12 700 Kč –11 % –10 % až –11 % 11 200 Kč 11 500 Kč od 11 200 Kč
Na objednávku Na objednávku Zvolte variantu
Velikost v m²
Zvolená varianta není k dispozici. Reset vybraných parametrů.
Můžeme doručit do:
12.4.2024 12.4.2024 Zvolte variantu
Možnosti doručení

Torro od velikosti 5,7 m3 k dostání také ve variantě s větším podílem monofilmu. To dělá plachtu ještě o něco lehčí a zaručuje jí více freeride vlastností.Vždycky jste chtěli lehkou freemove plachtu vhodnější na freeride windsurfing? Tak tady jí máte! Torro - Klasická všestranná plachta z nabídky Gun Sails.

SailTechIcons1

Detailní informace

Možnost otestovat zboží
Možnost otestovat

Produkt s "možností otestovat" lze půjčit u nás dle domluvy.

Doprava zdarma již při nákupu nad 2000,-
Doprava zdarma od 2000,- Kč
Rychlé doručení do 24 hodin
Doručení do 24 hodin
Online od Po do Ne 10-23
Komplexní servis a poradenství

Detailní popis produktu

Our Freemove classic Torro is now available from 5.7 sqm in a version with a higher monofilm percentage, the Torro FR. This makes the sail a bit lighter and also a bit more freeride oriented. The X-PLY in the main window has been replaced by monofilm, which gives the Torro FR a bit more crispy feeling when accelerating and in top speed in the straight line. So if you can renounce the bullet proof characteristics of the classic Torro and place a little more emphasis on flat water characteristics, you've come to the right place. 

Torro-FR-Program-2019

  • extrémně ovladatelná freeride plachta
  • vylepšené freeride charakteristiky díky lehčí konstrukci
  • optimální kombinace ovladatelnosti a výkonu
  • specifické použití různého typu vzpěr, v závislosti na zvolené velikosti
  • 50% X-ply konstrukce a maximální zesílení zajistí nezničitelnost a dlouhou životnost
  • kompatibilní s RDM i SDM stěžni

gunsails-torro-fr-1_1

5 battens, including a tube batten above the boom, allow an amazing top speed, as well as early planing abilities.The distinctive yet variable profile combines acceleration with a huge wind range and an easy and forgiving handling.
The sizes of the Torro FR starting with 5.7 move a bit further into the freeride and bump and jump zone. By using 3 mil Square Ply in the top of the sail, the Torro FR remains light without losing its familiar durability.
The Torro FR is not only the ideal combination of many disciplines but represents endless windsurfing fun for all levels.

gunsails-torro-fr-3_1

Fred-2019   Top-Guard-2019   Vario-Top-2019

F.R.E.D

F.R.E.D. will help you to fi nd the optimal luff trim for your sail. The mark is found in the upper sail window and serves as an orientation point to create the perfect luff tension (loose leech).

 

TOP GUARD

The large reinforcement at the sail top avoids abrasion and wearing out whilst rigging.

 

VARIO TOP

The top opening is enlarged for an easier mast insertion. The adjustment buckle is placed behind the mast; unnecessary webbing can be stowed in the top opening.

Mini-Battens-2019   Batten-Guard-2019   Internal-Trim-Batten-2019

MINI BATTNES

Lightweight mini battens take control of the leech while twisting and avoid detrimental leech fl utter. In this way, the window fabrics are spared and the longevity of the sail is predefined.

 

BATTEN GUARD

PVC tabs on the upper batten pockets prevent wearing out and abrasion whilst rigging.

 

INTERNAL TRIM BATTEN

Lightweight mini battens take control of the leech while twisting and avoid detrimental leech fl utter. In this way, the window fabrics are spared and the longevity of the sail is predefined.

Pocket-Guard-2019   RBL-2019   Offset-Clew-2019

POCKET GUARD

A PVC braid, sewed on the bottom batten pocket, protects your sail from abrasion while uphauling and waterstarting.

 

REDUCED BOOM LENGHT

The Reduced Boom Length design shortens the boom length. The handling is much easier and feels more compact. The sail control is signifi cantly improved. A shorter boom is generally stiffer and will assist in maintaining the sail stability and profile.

 

OFFSET CLEW

The Wave sails are equipped with 2 clew eyelets which are set asymmetrically for individual tuning:

Upper eyelet for more power
Lower eyelet for more control

Trim-Setting-2019   Boom-Position-Control-2019   Double-Lock-Seams-2019

TRIM SETTING

The boom length is printed beside the clew. The mast lenght is patched on the mast protector.

 

BOOM POSITION CONTROL

The printed height scale at the boom opening helps you to easily remember your personal boom position.

 

DOUBLE LOCK SEAMS

Double seams form the most stable connection between individual panels and different materials. They are used in stress zones as well as in areas of high tension and make your sail robust and durable.

Foot-Guard-2019   Comfort-Pulley-2019   Sleeve-Volumer-2019

FOOT GUARD

All seams in the significantly stressed foot area are protected by Dacron coverings. A PVC edging from foot to the first batten protects the leech edge against your board’s nonslip coating.

 

COMFORT PULLEY

The integrated triple pulley has large easy turning stainless brass rolls which greatly reduce the effort required for sail trimming. Also, if you prefer, the rolls are removable to allow the use of standard downhaul pulley hooks.

 

SLEEVE VOLUMER

The GUNSAILS logo that is sewn on the sleeve keeps it open at the boom opening area like a clip and thus mast insertion is much easier.

Strap-On-2019   Mesh-Pocket-2019   Mast-Foot-Protector-2019

STRAP ON

For very easy packing away and storage: Just roll the sail up and fix the elastic retainer.

 

MESH POCKET

On the inside of the protector you will find a closable mesh pocket which can hold e.g. your downhaul surplus.

 

MAST FOOT PROTCTOR

The large mast foot protector can be pulled back whilst rigging. The loop eases the initial pulling down of the sail. The uphaul can be comfortably inserted through an opening in the protector.

 

gunsails-torro-fr-4_1

Intelligent-Material-Assembly-2019   Tension-Frame-2019   Double-Lock-Seams-2019

INTELLIGENT MATERIAL ASSEMBLY

The well designed combination of different materials allows weight savings without losing stability. By varying the stretch behaviour of the individual materials, we can precisely define each sail profile under pressure and guarantee you consistent sailing characteristics over the long term.

 

TENSION FRAME

The Tension frame forms a functional unit with the smart clew construction. It is built from multidirectional x-ply and framed with insignia. Therefore it can resist maximum stress levels. The Tension frame receives the force from the clew and distributes the tension with the additional warp lines into the sail. The layout of the tension frame is designed to support the individual profile of every sail. Conclusively the tension frame improves the response of the sail and increases the profile stability. It also ensures long lasting sail characteristics and improves the overall durability of the sail.

 

DOUBLE LOCK SEAMS

Double Seams provide the most stable connection between panels or different materials. They find use in areas of high material tension and make your sail tough and durable.

Smart-Clew-Construction   Kevlar-Stretch-Control   Multidrectional-XPly-2019

SMART CLEW CONSTRUCTION

The Smart Clew Construction is based on the tension specific and precise alignment of different materials. The result is an extremely durable clew area without additional weight. Depending the sail the layout of the materials varies in order to suit the resulting tension lines in order to distribute the force from the clew, towards the Tension Frame into the sail. That helps to create more response, better profile stability and long lasting sail characteristics.

 

KEVLAR STRETCH CONTROL

Through the selected use of kevlar warp laminate, we are able to precisely define the stretch properties of every sail. This leads to more response and a long lasting and stable sail profile. The light and unidirectional kevlar threads show very low stretch, even under highest loads. They are individually positioned in each sail to suit its range of application, leading to long lasting performance and sail characteristics.

 

MULTIDIRECTIONAL X-PLY

Multidirectional X-Ply is used in high stress areas. The thread layout shows a higher density of polyester yarn, thus making the material more resistant than the regular X-Ply. The additional vertical thread direction allows the material to take more tension and force in the critical tension line.

Square-Ply-2019   X-Ply-2019    

SQUARE-PLY

The square ply is based on the same concept as X-ply material. However the threads are aligned in a 90 degree angle and the material offers a higher overall thread density. That allows us to reduce the thickness of the included monofilm to save weight, but ensure durability at the same time.

 

X-PLY

X-PLY the all time classic of the reinforced laminates. It is light, stable and has a good transparency. Therefore it is used in the window area of the Wave-and Cross Over Sails. X-Ply also does withstand higher punctual stress. In case of a cut, the threads avoid further damage because they stop the cut from spreading through the window.

   

 

Velikost m2 Ráhno cm Stěžeň cm Spiry Kembrů Top Délka stěžně Doporučený stěžeň
5,7 177 444 5/1 0 fix 430 RDM / SDM
6,0 182 446 5/1 0 fix 430 RDM / SDM
6,3 187 452 5/1 0 fix 430 RDM / SDM
6,6 192 455 5/1 0 fix 430 RDM / SDM
6,9 198 457 5/1 0 fix 430 RDM / SDM

 

Doplňkové parametry

Kategorie: Freeride
? Počet Spir: 5
Rok výroby: 2019
? Doporučeny stěžeň: RDM / SDM

GUNSAILS | Torro 2019

Jak nastrojit plachtu

Buďte první, kdo napíše příspěvek k této položce.

Nevyplňujte toto pole:

Gun Sails je značka, která se specializuje na výrobky pro windsurfing a další vodní sporty, s důrazem na inovativnost a dostupnost. Nabízí širokou škálu plachet, které jsou designovány pro různé disciplíny, od wave a freestyle přes freeride až po závody a foil. Kromě plachet nabízí Gun Sails také neopreny, vesty, helmy, boty a různé další doplňky pro windsurfing a SUP, včetně SUP paddleů a rigů.

Značka se vyznačuje výborným poměrem cena-výkon, díky čemuž jsou jejich plachty a další výrobky cenově dostupné a velmi konkurenceschopné. Gun Sails klade důraz na udržitelnost a inovace, a to se odráží i ve vývoji jejich produktů. V jejich nabídce najdete také produkty vyrobené z recyklovaného materiálu.

Jako distributor této značky v České republice se zaměřujeme na poskytování nejlepších cen na trhu, čímž umožňujeme přístup k vysoce kvalitním produktům pro širokou veřejnost. Gun Sails je tedy ideální volbou pro windsurfery, kteří hledají spolehlivé a cenově přístupné vybavení​.

Od roku 2024 Gun Sails rozšířila svou nabídku o spolupráci s firmou We One, která se specializuje na výrobu windsurfingových plováků. Tato spolupráce přináší do portfolia Gun Sails nový sortiment plováků, které jsou navrženy pro různé styly a úrovně windsurfingu. Plováky We One jsou známé svou kvalitou a inovativním designem, což je v souladu s filozofií Gun Sails zaměřenou na kvalitu a dostupnost.